Thread: Big 3 Upgrade
View Single Post
Old 11-26-2012, 09:20 AM   #1
Devs93
Full Access Members
 
Devs93's Avatar
 
Join Date: Oct 2012
Posts: 780
Default Big 3 Upgrade

The "big 3" upgrade is a common mod done by owners. It involves upgrading the size and quality of wire for the battery and alternator. This will provide better current flow which can affect many aspects of your vehicle (i.e. less voltage drop, no dimming lights, even better mileage, etc...).

There has been some debate on whether or not to fuse the lead from the battery to the alternator. I chose to have the extra insurance and fused it with a 200amp waterproof ANL fuse.

For parts, I ordered my supplies from knukonceptz.com. Good quality and value for the price. Most go with 1/0 gauge wire. You could even use welding cable.

I followed the paths of the factory cable and finished everything off with wire loom.

On the (-) side:
Battery to chassis
Battery to block

On the (+) side:
Battery to alternator

On with the pics:

Le parts


Test fitting the battery terminals


For the battery to frame lead, I used a common ground bolt almost directly below the battery.


Here's a shot of the bolt looking from underneath the truck.


The ground bolt on the block is hard to see. Removing the plastic splash guard just under and behind the front of the truck will help immensely.


Making progress.


Some finished pics:










__________________
http://i1262.photobucket.com/albums/...1857630329.jpg
93 ecsb 5/7 2 tone shaved smoked lights hids and leds flowmaster and some more 295/50 245/50
Deven
http://www.gmt400.com/forum/showthre...B-Build-Thread
FB
http://www.facebook.com/#!/profile.p...00001465284578
Negative Altitudes Draggin That Shit Since 2006
Devs93 is offline   Reply With Quote