Here's how I increased the signal from my Keyless entry remote 7x!
I could only lock/unlock my truck from ~5 feet. Now I can do it from 35 feet away.
Items needed:
Soldering iron
Solder
~4" wire
Here's the average distance for the factory remote (in my case).
The FCC has a maximum signal output that the manufacture must abide buy. Well, like Bieber F 'em!
Process:
Use a flat screwdriver to separate the two halves of the remote
The 2 halves & the buttons were little dirty.... Clean 'em up.
Grab your Soldering iron, solder & a short piece of wire.
Solder the wire to the area pictured.
Route the wire like this.
Put the two halves back together and test it out.
Any questions?
Thx truckin
