Go Back   Indiana Truck Scene Forum > Stock and Lifted Trucks > 4x4 Builds

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 03-07-2013, 08:47 AM   #13
Hardtrailz
Member
 
Join Date: Feb 2013
Posts: 31
Default

My truck came with a G80 3.73 equipped 8.0 rearend. While it has done alright with my big tires and multitude of modifications, I have always wanted more strength and reliability than the G80 8.0 offered. I have the sensors out on the end of the axle tubes requiring an 06 or newer rear and never found a 8.6 for a decent price. I got it in my head to swap to a lower gear set as well with the 35s going on as a permanent fixture soon. The front diff was the real sticky part in the gear change, but I found a decent price on a unit from an SS offering 4.10 gearing and the guy happened to have a 4.10 SS rearend as well. Bought them both as a good package price. The SS rear has 4.10s and a G86 limited slip rear differential. While the gears were to my liking, the LS was not going to meet my needs. I found a new in box LockRight lunchbox locker and snapped it up, but to facilitate its use I needed an open carrier. I sourced a used open carrier from WFO Concepts and got them to press on some new Timken bearing before shipping it and a super shim kit to me.

So now I had all the parts to step up from the 8.0 3.73 G80 rear to a locked 9.5 4.10 rear. The SS rear is a semi-float 14 bolt often found in 3/4 ton truck and in all SS TB's. It boasts a 9.5 inch ring gear, 33 spline shafts of good diameter. The general consensus is that this is about the equivalent of a Dana 60. Much stronger than my setup was.

I thought of attempting the carrier swap myself, but decided that enlisting some help from experienced friends would be much better. Even though I really was only concerned with backlash and pattern, I am glad I did not go it alone, but would not hesitate to do it again. Had the rear came with an open locker, this would have been a couple hour drop in job, but since I had to swap carriers...no quite so easy.

How about pics....

The Donor...08 SS


Junk stripped off


Ready to get to swapping


The help and axle on the sawhorses- Started about 8 Friday night


The locker


The motivation


Sticker in locker box


Cover off- Actually really clean with no metal clunks


Dirty inside


Cleaned up inside


The LS carrier had no gussets for strength


The open carier did...


Work






Help
Hardtrailz is offline   Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump