What is your exhaust set up?

[Bearcat91]

Post up what your running for an exhaust and what truck its on... video would be awesome!

Im hoping to get mine finished up soon...

[rj2]

The 03 has ebay long tubes no cats true duels borla muffleror 3 inch piping. 1"7/8 collectors. The escalade now has kooks long tubes 3 inch pipes corsa sport exaust. Single pipe not duals. Comming out in stock location with stock tip. I want to try some spintek (spelling?) Mufflers. Have heard good things but i dunno.

[rj2]

Which reminds me i have to update my sig

[2doorfury]

1-3/4'' pacesetter headers into 3'' true duals with H pipe. mufflers are 3'' dynomax race bullets. i gota sound clip in my intro thread. and you've heard it in person. hearing it in person does it justice.:chewie:

[Bearcat91]

1-3/4'' pacesetter headers into 3'' true duals with H pipe. mufflers are 3'' dynomax race bullets. i gota sound clip in my intro thread. and you've heard it in person. hearing it in person does it justice.:chewie:

the video doesn't do it justice! sounds awesome

right now all i have is a flowmaster and 3in pipe turned out before the rear tire. I have a set of hooker super comps sitting in the basement waiting to go on.

[Red91]

I am running some ebay shorties, stock y-pipe 3" pipe, 3" cat, 3" in dual 2.5" out flowmaster 40 with some 3x16" tips is sounds ok but it needs to get done again. I have an annoying "pop" leak from the y-pipe. I want to run some 2.5" duals with moderate mufflers dumped before the axle and all tucked ;) I will need it!

[rj2]

Just a tip if your doing exaust either get long tubes or run stock manifolds. No sense in getting shorties

[2doorfury]

If anyone in the Indianapolis area is looking for a exhaust shop. Go to bells in martinsville. Very reasonable and good work..aand, if you dont want cats, he wont make you put them on.

[e3mcgrath]

Go to bells in martinsville.
i 2nd, 3rd and 4th this! Beck's Service Center on Madison did a real nice job on my y-pipe too

[Two1Nine]

SLP Loudmouth 1 on my 06 silvy going to run the exhaust another route after winter

https://www.youtube.com/watch?v=XnEQBiRmpGM&feature=youtube_gdata_player

[02oldskool]

stock manifolds, 2" from manifolds back past trans Y into single 3" catco cat, into single 3" borla dumped before axle. Ranger 3.0. Will be redoing once i decide if I am turboing it or swapping to a 3.8 with turbo.

[Old77]

350 GM crate motor...True duals, dynomax headers, no cats, Flowmaster 40 Series muffler and stainless steel tips....

http://i910.photobucket.com/albums/ac305/07Burb/Truck/th_DSCN2998.jpg (http://s910.photobucket.com/albums/ac305/07Burb/Truck/?action=view¤t=DSCN2998.mp4)

[stargazer7467]

glass pack resonator to a dynomax super turbo, 2.5" pipe

[Cbennett]

On my project truck I did 3" oval duels with spin tech mufflers

http://img.photobucket.com/albums/v521/maxoctane20/truck003.jpg

See if that sound clip works

http://img.photobucket.com/albums/v521/maxoctane20/02bec7c2.mp4

And on my daily I'm rocking a coast fab muffler with 3" ss from cat back that I built. I'll try to get a couple pics and some sound

[Red91]

Sounds good man!

[Mike]

Had pacesetter lts with offroad y into a 12" bullet and 3" c/c cbe muffler with a 6" tip.

Will be running the same headers and y but changing to a singke in dual out 24" magnaflow with dual 3" turn downs

[Professorkaos]

Factory with clogged cat and a glass pack. I want to go with a quiet factory style exhaust that you basically can't hear.