GM key fob Mod

[Devs93]

Here's how I increased the signal from my Keyless entry remote 7x!
I could only lock/unlock my truck from ~5 feet. Now I can do it from 35 feet away.

Items needed:
Soldering iron
Solder
~4" wire

Here's the average distance for the factory remote (in my case).
http://i270.photobucket.com/albums/jj112/Daniel_Madrid/GM%20Keyless%20Remote%20MOD/replace-fiat-punto-key-battery-800x800.jpg


The FCC has a maximum signal output that the manufacture must abide buy. Well, like Bieber F 'em!
http://i270.photobucket.com/albums/jj112/Daniel_Madrid/GM%20Keyless%20Remote%20MOD/Justin-Bieber-Middle-Finger-Justin-Bieber-Apologizes-to-Photographers-300x450.jpg

Process:

Use a flat screwdriver to separate the two halves of the remote
http://i270.photobucket.com/albums/jj112/Daniel_Madrid/GM%20Keyless%20Remote%20MOD/IMAG0320.jpg

The 2 halves & the buttons were little dirty.... Clean 'em up.
http://i270.photobucket.com/albums/jj112/Daniel_Madrid/GM%20Keyless%20Remote%20MOD/IMAG0322.jpg
http://i270.photobucket.com/albums/jj112/Daniel_Madrid/GM%20Keyless%20Remote%20MOD/IMAG0323.jpg

Grab your Soldering iron, solder & a short piece of wire.
http://i270.photobucket.com/albums/jj112/Daniel_Madrid/GM%20Keyless%20Remote%20MOD/IMAG0326.jpg

Solder the wire to the area pictured.
http://i270.photobucket.com/albums/jj112/Daniel_Madrid/GM%20Keyless%20Remote%20MOD/IMAG0327.jpg

Route the wire like this.
http://i270.photobucket.com/albums/jj112/Daniel_Madrid/GM%20Keyless%20Remote%20MOD/IMAG0330-1.jpg

Put the two halves back together and test it out.

Any questions?
Thx truckin :)

[Bolt on]

neato!

[95fummins]

Ah adding antenna lenght i see

[98chev]

i still need to try this on mine. sometimes i think it would be quicker just to use the key rather than keep pressing the button lol