Here is from another site
I think we need to start a sticky. On york EDC setups. Pics of them install pics. Plumbing diagrams. Were to get the compressor. What are some part numbers for parts ( pressure switch, head adaptors, etc...)
Heres a cut away which shows why these suckers are such a good choice. They have there own crank for oil supply. They do consume oil but not to bad after they have been broken in (if new) If you get a junkyard special then no worries. But on mine as long as you keep it oiled it runs smooth. I have seen were there has been little or no maintenance. The compressor will seize up. Because of the oil that is left is getting burnt causing abnormal wear.
Service manual, very nice! Has all the demissions how much oil they take. Bolt hole locations an measurements.
http://www.ccicompressor.com/docs/tccisrvice.pdf
PARTS!!!
http://www.nextag.com/amazon_it--270...D365C6EF07E9D1
http://www.grainger.com/Grainger/items/2DC09
http://www.kilbyenterprises.com/compressors.htm
http://kilbyenterprises.com/pulleys.htm
http://www.gravity-werx.com/index.as...TS&Category=98
http://store.gaugemagazine.com/index...OD&ProdID=2054
http://www.waylayedinc.com/
http://www.triadtechnologies.com/sitemap/parkerlink.asp
Oil mod - waste of time! Doesnt let the head get any oil.
Crank case vent- On the compressor, you take out one of the plugs and put a filter on it. It also doubles as a oil fill too. (post picture when I get to it)
I don't have picture of mine. But guy on FSC (KruzenLow) I thinks thats his username, has a really nice bracket and setup.
I will post more stuff an edit more of this as I can get time. But feel free to add to it. But heres what the guts look like.
Heres a crude diagram of the plumbing an electrical, the black Dots are connections or Tee's You can put the pressure switch were ever, but I would say after the water trap. I forgot about doin that when I drew it.
Diagram courtesy of
KreepyOne
heres a list of vechiles
(sorry) couldn't get the HTML coding to work right, so just made them .png
update!!!