Originally Posted by Devs93
Stainless Braided Line:
You NEED ATLEAST 3ft of stainless braided line coming off of the flanges. The air coming out of a york is very hot, and the stainless line helps dissapate the heat. I got 3 ft of stainless line from www.mcmaster.com. Cost = $36.
You can get the stainless line from ART, but i do not know the link.
They spew alot of oil.
Because you are converting what once was a closed system into a open system, oil needs to escape somewhere. There are a few options, you can do the Oil Mod, or you can get an oil seperating unit from onboardair.com.
Read that Oil Mod link, as it is very informative. |
let me ad, you do not have to run stainless braided line. standard hydraulic line will also work.
also, the oil mod on yorks is not worth the time or effort
you can also use a standard pressure switch. no need for a unloader line as shown in the diagram