From there. You can begin putting CA on the ring of the dustcap.
Then place dustcap as desired on the subwoofer.
And put a ring of CA on the outside of the dustcap.
Then spray with Activator.
Then I like to place something heavy on top of the sub to put pressure on the spiders, surround, and dustcap to make sure it gets a good hold. I usually leave the heavy object on for 20 to 30 minutes.
After that time. Put the terminal leads into the terminals and prepare to solder.
Solder them hoes down and hope your not wasted by then.
After that. I always like to put another layer of CA on the spiders so there is NO gap and filled in nicely.
There you have it. A brand new sub. Now don't get too drunk.
reference DSBP