Go Back   Indiana Truck Scene Forum > Stock and Lifted Trucks > 4x4 Builds

Reply
 
Thread Tools Display Modes
Old 03-07-2013, 08:38 AM   #1
Hardtrailz
Member
 
Join Date: Feb 2013
Posts: 31
Default 2006 Trailblazer Build



Bought it in January or February of 2009.
2006 LS w 3.73 G80 4x4

Suspension Modifications:
MarkMC Full 3 inch New Style Kit.
Bilstein HD Struts.
BDS Shocks
suicidedoors.com Adjustable Panhard Bar
1/2 inch longer rear tubular control arms
Skyjacker Tahoe lift coils in Rear
88 Front springs
Rear swaybar delete
Front swaybar quicker disco's


Exterior Modifications:
MarkMC 3 inch Body Lift
Cut fender wells
Cut Front Fenders
MDB Fab front and rear bumpers
Yakima Roof Rack w extention on Thule bars
PIAA Lights
Decals--they add HP
TrailGear Rock rails--THANKS BARTONMD for the install
Oil Pan Skidplate MDB
Radiator SkidplateMDB

Engine Modifications:
Green Re-usable Air Filter
Gutted Air Box
Hooker Aero-chamber Muffler and aluminized piping w 3.5 in tip
PCMforless tune
Scanguage for monitoring

Interior Modifications:
Lights- LED
Stereo-Cd, subs
Cobra 75 WX CB
Custom Fit Black Leather Seat Covers
Husky liners

Recovery Equipment:
Bag of straps
emergency supplies, first aid, food, water
tools- Shovel, hatchet, large knife
hi-lift
shackles
Not recovery, but for safety there is always a firearm

Electrical Mods:
Just the lights mentioned above


Drivetrain Mods:
4.10 Gears
SS front diff
Rebuilt Disconnect
14 bolt rear diff
Lockright locker
Shortened rear steel driveshaft
1.5 Inch 6x5.5 Adaptors 14mm studs

Roller Mods:
315/70/17 Treadwright Guard Dogs
17x9 Knight Khrome ProComp wheels
Hardtrailz is offline   Reply With Quote
Old 03-07-2013, 08:39 AM   #2
Hardtrailz
Member
 
Join Date: Feb 2013
Posts: 31
Default

Stock--well close



MarkMC Lift On




Stock Rims width w BrushGuard


Silent Armor 265-70-17 on 17x8 Eagle Offroad Alloys with 1.3 adapters for 6x5.5 pattern

Clearance

Tires and rims- couple views




Front and Rear Brushguards--


Hardtrailz is offline   Reply With Quote
Old 03-07-2013, 08:40 AM   #3
Hardtrailz
Member
 
Join Date: Feb 2013
Posts: 31
Default

The change from 2-3 inch body for more clearance. Got the rubber to meet the steel inner fender crossing a dtich line by a field so I had to go up. i wont let the tires rub, again forgot to had a hacked 2 inches or so off the rear of the front fenders after the 305-65-17 MTs.


Here is a shot of the Hooker exhaust setup I went with and really like. Not too noisy but a little sound and seems to runs better. Also in this shot is my whiskey and coke and the body lift/mount

Bumpers off for the extra height




great before shot but cant find the extra with the added inch


Blocks and bolts went in good and the front bumper stuff did too, but the rear needed some adjustment since it was a prototype MarkMC hooked me up with.


But it got on and fit better than stock
Hardtrailz is offline   Reply With Quote
Old 03-07-2013, 08:41 AM   #4
Hardtrailz
Member
 
Join Date: Feb 2013
Posts: 31
Default

Got the body lift all on and put it in the National 4x4 Jamboree and got an absolute ton of attention. I was the tallest functioning Trailblazer there. I never really entered a show, so I decided to put some stuff about the build and I had a ton of people asking how, what, wow, where can i get one?






I know it is show and not wheeling but it was pretty cool leading in 4 JK's and then having more attention paid to mine than theirs.

FYI I will get my pics from work and everywhere else and try to make this more coherrent, but I was kinda pushed to make a thread. I have pics of most installs and know I forgot stuff. I will properly edit 1st post with a list of the whole setup tomorrow, but I got a start now.
Hardtrailz is offline   Reply With Quote
Old 03-07-2013, 08:41 AM   #5
Hardtrailz
Member
 
Join Date: Feb 2013
Posts: 31
Default

Oh Yeah..New mod coming soon







PICS OF THE INSTALL...THANKS TO BARTONMD






Hardtrailz is offline   Reply With Quote
Old 03-07-2013, 08:42 AM   #6
Hardtrailz
Member
 
Join Date: Feb 2013
Posts: 31
Default

viewtopic.php?f=9&t=276 --Slider thread

Stinger bumper fun



Cutting Frame a bit



[/quote]
Hardtrailz is offline   Reply With Quote
Old 03-07-2013, 08:44 AM   #7
Hardtrailz
Member
 
Join Date: Feb 2013
Posts: 31
Default





Test of Stinger bumper. Will be edone at some point, hopefully soon, but is stronger than the stock bumper and mounted better as well. I fugure it is better than just removing the front bumper cover and it added a bar in front of the lower radiator and will provide a nice mount place for a radiatior skid.

BARTONMD First STEEL SKIDPLATE--Thanks





Hardtrailz is offline   Reply With Quote
Old 03-07-2013, 08:44 AM   #8
Hardtrailz
Member
 
Join Date: Feb 2013
Posts: 31
Default

New Radiator Skid thanks to BartonMD

BEFORE---


THE SKID---


TRIMMING OIL SKID----


TEST FIT---



ITS ON---





ALSO GOT REAR BRUSHGUARD MODIFIED AND BACK ON TO WORK WITH BODY LIFT---





Couple shots of the total package cleaned up a bit.



Hardtrailz is offline   Reply With Quote
Old 03-07-2013, 08:45 AM   #9
Hardtrailz
Member
 
Join Date: Feb 2013
Posts: 31
Default

Been wanting to try some 35s, so I had these Yota rims i got awhile back...Anyone know what they are called or info so i can find centers?... 15x8. I found some 35x12.50x15 KM1s well used but siped and some tread left to play with and do a couple months of test fit without big expenditure.

It is cold but decided that I could use the LP heater to warm the beads and some whiskey to warm me and figred I would mount them myself. Only took about and hour and a half and a drink and a half to mount all four.



Went white letter out due to wear patterns and to complete what think of as old school look on these tires and wheels. 15 yrs ago I had the BFG MT with letters out on some similar wheels on my frst lifted blazer, so the look brought some good ole memories out.




Stance is better than the 33s and it looks like they should clear, but the firewall may need some massaging went turned and tucked.



Hardtrailz is offline   Reply With Quote
Old 03-07-2013, 08:46 AM   #10
Hardtrailz
Member
 
Join Date: Feb 2013
Posts: 31
Default

As it sits 9-24-2011







__________________________________________________ ________________________

Added a 12,500 lb winch on a custom mount by Mr Barton.




To be added once I get a hawse fairlead
Hardtrailz is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump