Go Back   Indiana Truck Scene Forum > Street Trucks > Bags to Body Drops

Bags to Body Drops Info and pics of bag jobs and body drops

Thread Tools Display Modes
Old 01-20-2013, 03:05 PM   #1
Junior Member
Join Date: Oct 2012
Posts: 5
Default what welder should be used for frame work?

Tig mig volts etc
AVA02 is offline   Reply With Quote
Old 01-20-2013, 09:11 PM   #2
Junior Member
Cbennett's Avatar
Join Date: Jan 2013
Age: 38
Posts: 19

220 mig would be the fastest and easiest IMO.. 110 migs work well on sheet metal and most will say they are fine on frames as well. Always use gas not a fan of flux core welding. If you have ass loads of time the tig would be awesome no clean up on welds ect. I usually only use my tig on parts that I can weld on the bench/exhaust.
Cbennett is offline   Reply With Quote
Old 02-08-2013, 03:15 PM   #3
Junior Member
impala631's Avatar
Join Date: Feb 2013
Posts: 15

A 220 mig set up for gas should be great,if for some reason you only have 110 then u might run flux core wire without gas and it will penetrate better,but there will be alot of spatter to clean up
impala631 is offline   Reply With Quote
Old 02-27-2013, 11:18 AM   #4
Corey Prince
Junior Member
Join Date: Feb 2013
Age: 36
Posts: 23

I've used both a 220 and a 110 and both i ran 75/25 gas and hard wire and they turned out good. just make sure with the 110 u have good penetration.
Corey Prince is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump